How to construct Some type of computer Without Really Trying

  • acer games appI didn稚 begin trying to create a computer. My CD disk drive stopped working and i also kept getting a mistake message which said, 典his drive is not available.・I visited the 杜y computer・file to check the status from the drive-thru the properties but the drive wasn稚 listed. Then i visited these devices manager to look for the drives status but it wasn稚 listed there either.

    Now I知 not just a computer whiz or computer 堵eek・but I do have some knowledge, although limited, regarding the way a computer works. After spending literally hours racking your brains on what went down to my CD drive, I finally decided to set it off and venture into the unknown. I took the coverage from the computer case. I had no idea a few things i needed and so i started tinkering around to see if maybe something had come loose. Certainly, a cable exploring back with the CD player was unplugged. I plugged the cable back in, put the cover back on, connected the ability cord and pushed the ability button to fireplace her up. I was kind of surprised to find out which it actually worked. This got me to wondering how hard it could be to construct some type of computer on your own. I went searching for line to find out if this is possible, something which I could do. Looking at various articles and visiting numerous web sites I decided take an attempt.

    The initial step would have been to know what kind of computer I wanted. First of all it had to be fast. No sense going through all of the trouble to create a dud. In addition, it had to be able to handle large videos, many photographs, and a vast amount of music (songs). And lastly I wanted it to be a media center; capable of playing and recording music, playing and recording DVDs, downloading and doing offers, and able to play cable tv. I also thought about being capable of connect an overhead projector and also have my wall since the screen while web surfing. Once I decided things i wanted, I started trying to find the components and or parts I might need.

    The very first thing I needed was a case, or tower. I discovered there are guide lines standardizing case such as ATX Form Factor. It is a standardized case designed to accept certain motherboards, and thus determining the layout of the inside of the case. I found a great resource for the parts I would need, inside a online store named Newegg.Com. Although I didn稚 understand it during the time, I then found out that and a vast product selection, and incredibly low huge discounts, their customer service was 鍍op flight.・Yes I suggest these guys.

    First in my list would be a Rosewill R114A-SLV silver steel mid-tower computer case. This situation was included with a 400w ATX 20-pin main connector power source. (See photo A). Next listed was obviously a motherboard. I desired an ATX Intel motherboard, (ATX meaning it could fit perfectly in my ATX mid-tower). With this I decided the ASUS P5P800 Socket T (LGA775) Intel 865PE ATX Intel motherboard. It's very powerful and cost-effective, and supports Intel痴 Pentium 4 processorョ. This processor supports Hyper-Threading technology which, in accordance with Intel痴 site 途esults in efficient usage of processor resources, higher processing throughput, and improved performance on today痴 multithreaded software.・This motherboard also includes a 775 pin Land Grid Array (LGA-775) socket designed for the Intelョ Pentiumョ 4 processor, and most importantly in my experience, a Users Guide.

    Next on the list would be a processor. I chose the Intelョ Pentiumョ 4 processor; 530J 3.0 GHz, 800 MHz FSB inside the 775 Land package. This very fast processor has a heat sink and fan assembly which utilizes push pin technology to install. For memory I made a decision on Rosewill痴 512 MB 184-pin DDR SDRAM DDR400 (PC3200), four times. For that hard disk drive I chose Western Digital痴 WDC1600ョ, 160 GHz 7200 RPM Serial ATA Hard Drive. I selected a Mitsumi 1.44 MB 3.5 Internal Floppy, a Rosewill DVD burner; model RD-162, and Rosewill CD burner; model RR-52, (both retail). With the exception of the floppy, all of my components were retail, IE, in original manufacturers packaging, etc. Also on my small list were 2 80mm Sleeve, Blue LED light case cooling fans, a Sound Blaster Liveョ sound card, an ATI All In Wonder 9600ョ 8X graphics/TV card, a Dellョ 17・Ultra Sharp lcd monitor, wireless mouse and keyboard, HP Photo Smart 7660ョ printer, and Logitech Z 2300ョ speakers.

    As you have seen I did so my homework. Prior to taking about this task, I didn稚 have a clue as to what a motherboard was, the thing that was a CPU痴 function, what a hard drive was along with what it absolutely was for, let's say any compatibility issues I'd encounter, and just how this 都tuff・worked together. So during the period of around three months I purchased most of these components. My initial mistake was i ordered the ASUS P4P800SE as opposed to the ASUS P5P800SE. The P4P800SE just isn't compatible with the Intel P4 LGA-775 processorョ. So now was obviously a opportunity to test the service level of I emailed them and explained my situation, and without hesitation they exchanged the motherboard and didn稚 charge us a restocking fee or freight. They acted as though they had made the mistake. Needless to say, I had been VERY impressed.

    Once all of the parts and components were here, I laid everything out, identified everything, and browse a persons guide that was included with the motherboard from cover to cover. Now was the 渡uts and bolts・time, enough time to place it together. The motherboard was included with ten screws and ten felt washers that have been accustomed to attach the motherboard to the case chassis. I placed the felt washers on the holes around the chassis and placed the motherboard over the felt washers. Therefore the felt washers were between your chassis and also the motherboard. Then i secured the motherboard for the chassis using the ten screws. Next was installing the CPU. I found out real fast how sensitive something it was. You can find 775 tiny pins or connectors that could easily get bent, and so make the CPU useless. I considered probably the most intimidating. However, I said a prayer, took time, got the CPU lined-up correctly, and proceeded with caution. Right diamond necklace! Perfect fit! The sweating was over.

    When i installed the heat sink and fan assembly on the CPU using the push pins, (push down and twist clockwise). Then i plugged the CPU fan cable to the connector about the motherboard labeled CPU_FAN. Then i installed the Serial ATA hard drive into one of many internal bays. Then I installed the floppy disk drive. Alongside install was the system memory. It痴 very important which you first 堵round・yourself by touching the metal chassis before handling the twin Inline Memory Modules (DIMM). This motherboard includes four DIMM sockets enabling the usage of various configurations, in line with the level of memory to become installed. I chose four 512MB DIMM modules, which kept it easier. I just unlocked the DIMM sockets by pressing the retaining clips outward. Next I aligned the DIMM around the socket in order that the notch around the DIMM matched the break around the socket. By pushing along, I firmly inserted the DIMM until the retaining clips snapped into place.

    When i installed the DVD optical drive inside the first bay, and also the CD optical drive in the second bay. This specific case has flip up doors which conceal the optical drives. Then i installed a network card into one of many five PCI slots and secured it to the chassis with screws. Next I installed the ATI All In Wonder9600ョ graphics card in to the Accelerated Graphics Port (AGP) slot. This motherboard only supports single.5v or 0.8v AGP card that is keyed to suit in to the AGP card slot.

    Next, was time and energy to set the 屠umpers.・The jumpers are set to see how included in the computer will function. As an example, there痴 a three pin keyboard power jumper which lets you enable or disable laptop keyboards wake up feature. There痴 a jumper cap that covers two three pins to discover the jumpers function.

    Next came the enjoyment part, the internal connections. I connected the FDD to the floppy disk connector with all the FDD signal cable. I then connected an electrical cable towards the FDD. Next I connected the serial ATA hard disk drive to one of these two SATA connectors having a serial ATA signal cable, then connected an electric cable for the hard drive. When i plugged in the CPU fan connectors, the serial (COM) port module cable to the serial port connector, two USB 2.0 ports, and game module. I then connected power cables towards the two optical drives. Next I connected the ATX power connectors (24-pin EATXPWR, 4-pin ATX12v), the internal audio connector (4-pin CD, AUX), front panel audio connector (10-1 pin FP-Audio), and last but not least, the system panel connector (20-1 pin Panel). The system panel connector is color coded so connecting it had been fairly simple. When i replaced the system case cover, connected the monitor, the wireless receiver for the keyboard and mouse, the speakers, and the cord. When i plugged the cord right into a wall plug.

    Now for as soon as of truth! I pushed the power button. Nothing happened! No lights on system panel, no onboard LED light, no CPU fan running! Nothing! Naturally I used to be crushed. This work with nothing. I began wondering things i may have done wrong, or could it have been some kind of compatibility issue. I went back for the beginning and retraced our connections, and they were all correct. After around an hour of tracing and retracing my steps it hit me. There was no power getting into the system! When i plugged in a lamp to try the outlet, also it worked fine.

    After going over everything again and again I realized that maybe, just most likely the felt washers were somehow preventing an association. It was worth a go therefore i uninstalled everything, and that i mean everything! I then took out the motherboard, removed the felt washers, replaced the motherboard, so that it was in direct experience of the truth chassis, put the felt washers on top of the motherboard, then tightened the motherboard towards the chassis with all the ten screws. I noticed the only instruction not in the users guide was the right placement of the felt washers! Then i reinstalled everything. When I plugged the ability cord in to the wall outlet the onboard LED light came on! I pushed the power button and she or he came on. It worked!

    Oh how happy I was. Then i entered the BIOS (Basic Input/Output System) and followed the steps to set the various parameters to manage the whole process of the computer. With all the users guide, they were pretty easy to set. While i finished setting the various parameters I installed the operating-system, Microsoft Windows XPョ with service pack II. Seeing the ASUS logo followed by the Windows 7 logo was just about the most gratifying parts of asus x200ca review does this whole ordeal. I was thrilled! My computer worked flawlessly the very first time I oftentimes tried it, and has worked flawlessly every since.

    I can watch TV programs, search the web at very quickly speeds (with cable modem), download songs and make up a play list, create photo disk, and albums, listen to AOL radio, watch videos, watch DVD movies, play games, Cod, The large Red Oneョ, and print excellent photos. This computer is awesome! Overall it was a really intense chance to learn. After i was committed there was no turning back, because too much money had been spent. Incidentally, I already owned a computer system made by an extremely respected manufacturer. I paid near $1,100 for your complete system and contains no where near the capabilities from the computer I just built. There is just no comparison. And i also spent a whole lot less building my own, personal, actually saved hundred of dollars. I priced major high end computers with the power and capabilities of the one I recently built and the cheapest stumbled on about $2,200. Unbelievable! Just goes to show, anything is possible in the event you stay with it, and most importantly, if you possess the Lord you side・br />

    Darryl Griffin
    November 2006